Programming The End Receiving Station Into Your Auto Dialler - Panasonic Workio DP-180 Operating Instructions Manual

■ Programming the End Receiving Station into your Auto Dialler

If the Fax Parameter No. 140
(LAN RLY XMT REQ) is set
to "Valid", you can enter the
Relay Address by the
following procedure.
5
<01>
ENTER TEL. NO.
Ex: 3961111234 and
press
SET
Enter the telephone number (up to 36 digits).
If the Relay and the End Receiving Stations are both in the same
area, omit the Country Code and the Area Code from the End
Receiving Station. The End Receiving Station is a local telephone
number as viewed from the Relay Station.
120
Advanced Internet Fax Features
Relayed Transmission
To set an One-Touch/ABBR Dialling for Relayed Transmission Request
1
COLOR COLOR
REMOTE REMOTE
COPY COPY
2
6
<01>ENTER NAME
☎
3961111234
Ex: ROME and
press
SET
Enter the station name (up to
15 characters) by using the
Character keys.