Toshiba 58L7350U User Manual page 80

0
Basicfeatures
Using 3D function
Change or deleteyourPINcode
1 Press the SETUP button.
2 Select 3I) > 3D PIN.
3 Press the OK button.
4 Press the number buttons to enter your 4-digit PIN code.
5 Select Change PIN or Delete PIN, and then press the OK button.
NOTE .'.. ThePINcodecannotbesetto "0000."
4 If PiNis deleted, 3 DSafety Settingsaregrayed out, andthe settings
areresetto thefactory default.
ForgottenPIN codes
1 Press the SETUP button.
2 Select3D >3DPIN.
3 Press the OK button.
4 Press the INFO button 4 times quickly.
5 Select Change PIN and press the OK button.
6 Enter a new PIN code.
Setting the 3D start message
When this feature is set to On, a message displays on the screen when a
3D signal is received.
1 Press the SETUP button.
2 Select 3D > 3D Safety Settings.
3 Press the OK button.
4 Enter your 4-digit 3D PIN code.
5 Press the A/V (arrow) buttons to select 3D Start Message and
press the OK button.
6 Press the A/V (arrow) buttons to select On or Off.
Setting the 3D Lock
When this feature is set to On, you must enter your 3D PIN code to
change the display mode to 3D mode or 2D to 3D mode.
1 Press the SETUP button.
2 Select 3D > 3D Safety Settings.
3 Press the OK button.