Playing The Cassette; Removing The Audio Cassette - Silvercrest SKD 1000 A2 User Manual And Service Information

Cassette Digitizer SilverCrest SKD 1000 A2
Before inserting the cassette, you should make sure that the tape is
slightly tensioned. This is to avoid the tape becoming chewed. Hold
the cassette in front of you with one hand, and using a finger of your
other hand, or a pencil, rotate the right-hand knurled wheel clockwise.
3. Close the cassette compartment by simply pressing down the cover until it
clicks into place.

Playing the cassette


You can play, stop, fast forward or rewind the cassette using the PLAY (10),
STOP (11), FF (8) and REW (9) buttons. See the description of the buttons on
page 10.

During the playback, you can adjust the volume by turning the volume knob (2)
clockwise or anticlockwise.

Removing the audio cassette

1. If the tape is still playing or if the Fast Forward or Rewind functions are
operating, press the STOP button (11) to stop it.
2. Open the cassette compartment cover by sliding the release button (5) in the
direction of the arrow.
3. Remove the audio cassette from the cassette compartment. First lift the side of
the cassette at which the tape is visible. Insert a fingernail into the upper edge
of the cassette and lift it slightly, so that you can then grip it at both sides and
completely remove it from the cassette compartment.
4. Close the cassette compartment by simply pressing down the cover until it
clicks into place.
English 15