Redialling - Panasonic UF-5300 Operating Instructions Manual

Redialling

Automatic Redialling
If a busy line is detected, the machine will redial the number up to 3 times at 3 minutes
interval. During that time, a message will appear as shown at right.
A file number is shown in the upper right hand corner of the display if it is a memory
transmission file.
Manual Redialling
You can also redial the last dialled number manually by pressing
To redial the last dialled number through memory
1
2
3
The document is stored into memory with a file number.
Then the machine dials the last dialled number.
To redial the last dialled number through ADF
1
2
3
4
Your machine starts to dial the last dialled number.
NOTE
Downloaded From ManualsPrinter.com Manuals
Set document(s) face down.
Set document(s) face down.
8 9
1
1. While the unit is displaying "WAIT TO DIAL", you can press
immediately.
Sending Documents
WAIT TO DIAL
<01>(Station name)
key.
Redial/Pause
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE *
PAGES=001
* DIALLING *
5551234
ENTER STATION(S)
THEN PRESS START 00%
MEMORY XMT=ON
1:OFF 2:ON
ENTER STATION
PRESS START TO DIAL
5551234
* DIALLING *
5551234
Redial/Pause
NO.001
NO.002
01%
NO.002
00%
to start redialling
65