Changing The Start Time Or The Station Of A File - Panasonic UF-5300 Operating Instructions Manual

Changing the Start Time or the Station of a File

To change the start time and/or stations in a communication file, follow the steps below.
1
2
3
Enter the file number or use
that you want to change.
Ex:
4
5
Enter a new start time.
Ex:
(If you do not have to change the time, skip to step 6.)
6
7
To delete the station(s), press
station you want to delete appears. Then press
or
Enter the station(s) you want to add.
8
NOTE
Downloaded From ManualsPrinter.com Manuals
9
2
0 0 1
(See Note 2)
(6:00 a.m.)
0 6 0 0
1. Your machine cannot change the start time and/or stations in the file while stored document is
being sent or the machine is waiting to redial.
2. If the file is not a Deferred Communication File, the following message is shown in the display.
SET DEFERRED COMM.?
1:YES 2:NO
Press to change the type of the file for deferred communication file.
1
or to select the file
or key until the
.
Clear
Edit File Mode
EDIT FILE MODE (1-6)
∨ ∧
ENTER NO. OR
∨ ∧
ENTER FILE NO.OR
FILE NO.=
∨ ∧
ENTER FILE NO.OR
FILE NO.=001
DEFERRED XMT
START TIME 22:30
DEFERRED XMT
START TIME 06:00
<01>(Station name)
5551234
ENTER STATION(S)
THEN PRESS START
1 STN(S) ARE SET
ADD MORE OR START
* STORE * NO.005
89