Turning On Your Radio - Motorola APX 3000 User Manual

Turning On Your
Push the On/Off Switch to turn the power on or off. You see a
green spot when the switch is in the ON position.
On/Off Switch
8
English
Radio‡
If the power-up test is successful, you see momentary
MOTOROLA on the DRSM.
Note: If the power-up test is unsuccessful, you see ER XX/
YY (XX/YY is an alphanumeric code) on your DRSM
screen. Turn off your radio, check the battery, and turn
on your radio.
If your radio fails the power-up test again, record the
ER XX/YY code and contact your dealer.
Note: If the power-up test is successful, but you see HW BRD
ABSENT or HW BRD MISMATCH on your DRSM
screen, send your radio to the qualified technician to fix
this error.
If the power-up test is successful, but you see HW BRD
FAILED or MAND HW ERROR on your DRSM screen,
send your radio to the qualified technician to fix this
error.
To turn off your radio, push the On/Off Switch until you do not
see the green spot.