Triggering Emergency; Exiting Man Down Feature; Re-Initiating Man Down - Motorola APX 3000 User Manual



Triggering Emergency

When you have not clear the Man Down condition and the Post-
Alert Timer comes to an end, Emergency Alarm or call is
triggered. Your radio sends emergency message to units within
the same Talkgroup. Your radio also sends ID number and GPS
coordinates to your dispatcher if these features are enabled.
See Emergency Operation†‡ on page 39 for details regarding
exiting Emergency mode.
Note: At this point the Man Down features is complete. Use
normal Emergency procedures to cancel Emergency
transmissions.


Exiting Man Down Feature

If you are not in a real Man Down situation, you should exit the
Man Down feature and prevent emergency from going off with
the following operation.
Procedure:
Repositioning your radio or shaking your radio (when motion
sensitivity is enabled).
OR
Press the preprogrammed Man Down Clear button to exit.


Re-Initiating Man Down

After exiting the Emergency Operation when your radio is still in
Man Down condition (tilted achieving threshold angle or
motionless), reinitiate the Man Down feature by exiting the Man
Down condition.
Procedure:
Return your radio to the vertical position
OR
Shake your radio (when motion sensitivity is enabled).
45
English