Panasonic KX-NCP1000 Programming Manual page 35

RTP QoS-ToS Priority
Specifies the priority level in the ToS field.
Default
0
Value Range
0–7
RTP QoS-ToS Type
Specifies the ToS type in the ToS field.
Default
Normal
Value Range
Normal, Monetary Cost, Reliability, Throughput, Delay
RTP QoS-DSCP
Specifies the value in the ToS field by a DSCP for DiffServ.
Default
Not stored.
Value Range
0–63
RTP QoS-HEX
Specifies the value in the ToS field by a hexadecimal number.
Default
Not stored.
Value Range
00–FF
RTCP Packet Sending Ability
Specifies whether to enable each port to send RTCP packets.
Default
Enable
Value Range
Disable, Enable
RTCP Packet Interval
Specifies the interval time until the next RTCP packet is sent.
Document Version 2009-12 Programming Manual for Virtual SIP CO Line Card
3.1.9 RTP/RTCP
35