Panasonic KX-NCP1000 Programming Manual page 38

3.1.11 T.38 Option
Port
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Connection
Indicates the port status.
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
T38 FAX QoS Available
Specifies the type of value to be stored in the ToS field in the IP header when using the T.38 protocol.
Default
ToS
Value Range
ToS, DSCP, HEX
T38 FAX QoS-ToS Priority
Specifies the priority level in the ToS field when using the T.38 protocol.
Default
0
Value Range
0–7
T38 FAX QoS-ToS Type
Specifies the ToS type in the ToS field when using the T.38 protocol.
Default
Normal
38 Programming Manual for Virtual SIP CO Line Card Document Version 2009-12