Basic Sequence Of Operations - Canon Finisher-AB1 Service Manual

3.5.2 Basic Sequence of Operations

The intermediary tray block uses the following 4 sequences of operations:
1.Stacking Operation [1]
Deposits sheets coming front the transport block in the intermediary tray.
2.Aligning Operation [2]
Switches over the point of depositing stacks between the front and the rear of the tray. (in shift mode)
3.Stapling Operation [3]
Staples a stack of sheets at a specific point. (in staple mode)
4.Delivery Operation [4]
Discharges the sheets deposited in the intermediary tray to the tray A or the tray B.
The following are the particulars of the individual operations:
[4]
[1]
F-3-21
[2]
[3]
Chapter 3
0015-2085
3-23