Important Safety Instructions; Save These Instructions - Sharp JH-3500U Installation & Operator's Manual

Grid - interactive 1-phase inverter for photovoltaic system
Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important safety instructions for JH-3500U that shall be followed during the installation and
maintenance of the solar power conditioner.
To reduce the risk of electrical shock, and to ensure the safe installation and operation of the solar power conditioner,
the following words appear throughout this manual to inform you of or alert you something may cause dangerous
situation or safety instructions must be followed.
WARNING : May cause serious injury or kill a person unless the instructions are followed.
CAUTION : May harm or damage a person unless the instructions are followed.
NOTE
: Important information when installing or using the solar power conditioner.
General Safety Precautions
WARNING
• Follow all cautions and instructions marked on the solar power conditioner and this manual.
• Check all electrical connections to be firm and secure;
failure to do so may result in solar power conditioner from heat, smoke, and or fire.
• Never use the solar power conditioner except for the grid connected photovoltaic (hereafter called PV) power
system.
• Refer all installations of the solar power conditioner to certified personnel only after receiving prior approval
from a power company.
• Installation of the solar power conditioner and other devices in improper locations may cause smoke or fire
from each device.
• To reduce risk of electrical shock during installation or servicing, turn off all AC and DC disconnects.
CAUTION
• All electrical installations should be done in accordance with the local and national electrical codes ANSI /
NFPA70.
NOTE
• This solar power conditioner contains no user serviceable parts. Return the unit to a SHARP authorized
service center for maintenance.
symbols in the solar power conditioner and in this manual indicate grounding.
symbols in the solar power conditioner indicate "on" and "off" symbols. "
"off" symbol.
• Never exceed the voltage of more than 380V, which is the maximum system voltage of the solar power
conditioner.

SAVE THESE INSTRUCTIONS

" is "on" symbol and "
" is
ii

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents