JVC DR-MV1S Instructions Manual page 61

8
Press w e to select "PREVIEW", then press ENTER to preview
the play list.
9
Press w e to select "EXECUTE", then press ENTER. The play
list is created.
To modify the points
A Press w e to select "CLEAR", then press ENTER.
B Repeat steps 5 – 9 as necessary.
10
Press NAVIGATION to return to the normal screen.
NOTES:
● There may be a discrepancy of several seconds between the scene
you intend to edit, and the scene which is actually edited.
● The title, index and category of the play list can be modified in the
same way as "ORIGINAL". (
● You can modify the play list that has just been created here by
adding, moving, or deleting unwanted parts to create a digest edition,
etc.
Add Scenes To A Play List
1
Perform steps 1 to 3 of "Create Play List" (
continuing.
2
Press w e to select the play list to which you wish to add a
scene, then press t.
3
Press w e to select "EDITING", then press ENTER.
4
Press w e to select "ADD
SCENE".
5
Press 4 to start playback. The
playback pictures appear in the
window on the screen. The
elapsed playing time starts
counting with the arrow on "IN".
● To locate the beginning of other
titles, press 2/6.
6
Find the point where you want the added scene to begin, then
press ENTER with the arrow on "IN". The edit-in time is fixed and
the elapsed playing time starts counting again.
7
Find the point where you want the added scene to end, then
press ENTER with the arrow on "OUT". The edit-out time is fixed.
● Press 3, 4, 5, 2, 6 or 9 to find the edit-in and edit-out
points.
8
Press w e to select "PREVIEW", then press ENTER to preview
approximately 5 seconds before and after the edited scene.
9
Press w e to select "EXECUTE", then press ENTER. The
selected scene is added.
To modify the points
A Press w e to select "CLEAR", then press ENTER.
B Repeat steps 5 – 8 as necessary.
10
Press NAVIGATION to return to the normal screen.
NOTE:
There may be a discrepancy of several seconds between the scene you
intend to edit, and the scene which is actually edited.
pg. 58)
pg. 60) before
NAVIGATION (DVD DECK ONLY)
Move Scenes
1
Perform steps 1 to 3 of "Create Play List" (
continuing.
2
Press w e to select a play list into which you wish to move a
scene, then press t.
3
Press w e to select "EDITING", then press ENTER.
4
Press w e to select "MOVE
SCENE".
5
Press 4 to start playback. The
playback pictures appear in the
window on the screen. The
elapsed playing time starts
counting with the arrow on "IN".
● To locate the beginning of other
titles, press 2/6.
6
Find the point where you want the moved scene to begin, then
press ENTER with the arrow on "IN". The edit-in time is fixed and
the elapsed playing time starts counting again.
7
Find the point where you want the moved scene to end, then
press ENTER with the arrow on "OUT". The edit-out time is fixed.
8
Press 4 to start playback.
9
Find the point where you want the moved scene to be moved,
then press ENTER with the arrow on "MOVE TO".
● Press 3, 4, 5, 2, 6 or 9 to find the edit-in, edit-out and
move-to points.
10
Press w e to select "PREVIEW", then press ENTER to
preview the part approximately 5 seconds before and after the
point to which the scene has been moved.
11
Press w e to select "EXECUTE", then press ENTER. The
selected scene is moved.
To modify the points
A Press w e to select "CLEAR", then press ENTER.
B Repeat steps 5 – 11 as necessary.
12
Press NAVIGATION to return to the normal screen.
NOTE:
There may be a discrepancy of several seconds between the scene you
intend to edit, and the scene which is actually edited.
61
EN
pg. 60) before