Panasonic BB-HNP15A Operating Instructions Manual page 29

Setting the motion detection level
You can set the level at which to start motion detection recording.
Motion detection recording only operates when the JPEG format is selected.
If the MPEG-4 format is selected, change the format to JPEG (see page 25).
Motion Detection Page
The cell where motion
was detected is displayed
in red.
Setting
Non Motion
Detection Operation
Motion Detection
Analysis Frequency
Sensor deactivation
time
Threshold to Start
Recording
Motion detection monitoring window
You can monitor the progress of motion detection.
If you check the box, the motion is not detected during the pan,
tilt or zoom operation of the camera.
(If the camera does not support the MPEG-4 format, this is
grayed out.)
Set the interval for comparing images.
By increasing the interval, you can better detect slow-moving
objects, and by decreasing the interval, you can better detect
fast-moving objects.
To limit unnecessary continuous detection, set the deactivation
time between detections.
The image is divided into 100 cells. If the number of cells that
detect motion exceeds the threshold, recording starts.
A lower threshold is more sensitive to small amounts of motion.
Description
Operating Instructions
29