Printout Problems; Print Quality Is Poor - Epson L565 User Manual

User's Guide
❏ Connect the USB cord securely to the printer and the computer.
❏ If you are using a USB hub, try to connect the printer directly to the computer.
❏ If you are using the printer over a network, make sure the printer is connected to the network. You can check
the status by checking the indicators on the control panel or by printing the network status sheet. If the printer
is not connected to the network, see the Network Guide.
❏ If you are printing a large data size image, the computer may run out of memory. Print the image at a lower
resolution or a smaller size.
❏ In Windows, click Print Queue on the printer driver's Maintenance tab, and then check the following.
❏ Check if there are any paused print jobs.
Cancel printing if necessary.
❏ Make sure the printer is not offline or pending.
If the printer is offline or pending, clear the offline or pending setting from the Printer menu.
❏ Make sure the printer is selected as the default printer from the Printer menu (there should be a check mark
on the menu item).
If the printer is not selected as the default printer, set it as the default printer.
❏ In Mac OS X, make sure the printer status is not Pause.
Select System Preferences from the
double-click the printer. If the printer is paused, click Resume (or Resume Printer).
❏ Perform a nozzle check, and then clean the print head if any of the print head nozzles are clogged.
❏ If you are using the printer through AirPrint, enable the AirPrint setting on Web Config. If this setting is
disabled, you cannot use AirPrint.
Related Information
"Canceling Printing" on page 51
&
"Checking and Cleaning the Print Head" on page 81
&

Printout Problems

Print Quality Is Poor

Check the following if the print quality is poor due to blurry prints, banding, missing colors, faded colors,
misalignment, and mosaic-like patterns in the prints.
❏ Make sure the initial ink charging is complete.
❏ Check the ink tank. If the tank is empty, refill the ink immediately and clean the print head.
❏ Run the nozzle check and then clean the print head if any of the print head nozzles are clogged.
❏ If you have not used the printer for a long time, use the Power Ink Flushing utility of the printer driver.
❏ Align the print head.
❏ If misalignment appears at intervals of 2.5 cm, align the print head.
❏ Use paper supported by this printer.
❏ Do not print on paper that is damp, damaged, or too old.
❏ If the paper is curled or the envelope is puffed up, flatten it.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
106