Table of Contents
Advertisement
USING YOUR COOKTOP
IGNITION SYSTEM
PILOT IGNITION
PILOTLESS IGNITION
Your range is equipped with either pilot
When the range is first installed, the pi-
ignition (using a pilot flame to light the
lots may be difficult to light due to air in
burner) or pilotless ignition (using a
thegasline.Tebleedoffairfromtheline,
sparkfrom an ignitor to lightthe burner),
hold a lighted match next to the burner
and turn knob on. When the burner
lights, turn the knob off and proceed as
Besure all surface controls are set inthe
directed below.
OFF position prior to supplying gas to
the appliance.
To light pilot: Removeor raise and sup-
port cooktop on metal rod, if equipped.
Hold lighted match near the pilot ports.
TO OPERATE SURFACE BURNER
WITH PILOTLESS IGNITION DURING
__1==
A POWER FAILURE:
1. Besure all controls are in the OFF po-
sition. Hold a lighted match to the de-
sired surface burner head.
2. Turn knob to LITE. The burner will
then light.
3. Adjust the flame to the desired level.
-7-
Advertisement
Table of Contents
