Advertisement
Cleaning the tool
Clean the tool regularly.
Warning! Keep your product dry. Under no
circumstances spray with water.
• To clean the tool, use only mild soap and a
damp cloth.
Warning! Do not use any type of detergent,
cleaner or solvent which may contain chemicals
that could seriously damage the plastic.
• Self lubricating bearings are used in your
product, therefore lubrication is not required.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled materials
helps prevent environmental pollution and
reduces the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a
new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage
of this service please return your product to any
authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local Black & Decker
office at the address indicated in this manual. Alternatively,
a list of authorised Black & Decker repair agents and full
details of our after-sales service and contacts are
available on the internet at: www.2helpU.com
Batteries
Black & Decker batteries can be recharged
many times. At the end of their useful life,
discard batteries with due care for our
environment:
6
Run the battery down completely, then remove it from the
tool.
NiCd, NiMH, Li-Ion and lead acid batteries are recyclable.
Take them to any authorised repair agent or a local
recycling station.
Technical data
CS100-XE
Voltage
Weight
Battery Type
HR5.5-12 Sealed Lead Acid
Charger
Voltage
Approx. charging time
EC declaration of conformity
CS100-XE
Black & Decker declares that these products conform to:
98/37/EC, 2006/95/EC, EN 50260, EN 61000, EN 60335
2000/14/EC, Leaf blower, 2.0 m
Level of sound pressure, measured according to 2000/14/EC:
L
(sound pressure) 74 dB(A), uncertainty (K) 3 dB(A)
pA
L
(acoustic power) 88 dB(A), uncertainty (K) 3 dB(A)
WA
L
(guaranteed) 90 dB(A), uncertainty (K) 3 dB(A)
WA
Hand/arm weighted vibration value according to
EN 60745 Annex K: 2.5 m/s
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Spennymoor, County Durham DL16 6JG,
12V DC
3.3 kg
230 VAC
16 hrs
, Annex V
3
2
Kevin Hewitt
Director of Consumer Engineering
United Kingdom
1-7-2008
Advertisement
