Technical Data - Black & Decker BDB530 Manual

ENGLISH
Assembly
Warning! Before assembly, make sure that
the tool is switched o and unplug.
Use
Mounting The Nozzle For Blowing
Operations (fig. A)
• Insert the pin located inside the Nozzle
into the notch provided on the Blast Port
(2)
• To lock Nozzle in place, turn the Nozzle
in the direction indicated.
• To remove Nozzle, turn the Nozzle in the
opposite direction.
Mounting The Nozzle And Dust For
DustCollection (fig. B)
• For dust collection, mount the Dust Bag
at the Blast Port (2) and Nozzle at the
Suction Port (5)
• To remove Dust Bag and Nozzle, simply
pull out by first turning in the opposite
direction.
• Empty the Dust Bag frequently to ensure
maximum dust collecting e ciency.
Operating The Blower (fig. C)
• To switch your Blower on, depress the
Switch (3). To stop your Blower, release
Switch.
• When continuous operation is required,
first depress the switch and then the
lock-on button (4) and release to
disengage lock, squeeze and release
switch.
Warning: Continuous running of machine
should not exceed 30 minutes.
Replacing Carbon Brushes (fig. D)
• Use a screwdriver to remove the brush
holder cap.
• Take out the worn carbon brush, insert
the new one and secure the brush hold
cap.
6
(Original instructions)
Warning! Remove and check the carbon
brushes regularly. Replace when they wear
down to the limit mark.
Accessories
The performance of your tool depends on
the accessory used. BLACK+DECKER and
Piranha accessories are engineered to high
quality standards and designed to enhance
the performance of your tool. By using these
accessories you will get the very best from
your tool.
Maintenance
Your tool has been designed to operate over
a long period of time with a minimum of
maintenance. Continuous satisfactory
operation depends upon proper tool care
and regular cleaning.
Warning! Before performing any
maintenance, switch o and unplug the tool.
• Regularly clean the ventilation slots in
your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.

Technical data

Voltage
Frequency
Power
No-load speed
Air Volume
Weight
L (sound pressure)
pA
K (sound pressure uncertainty)
pA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum)
determined according to EN 60745:
Vibration emission value a
a =
h
Uncertainty K =
BDB530
V 220 - 240
Hz 50/60
W 530
/min 16,000
3
m /min 3.5
Kg 1.6
dB(A)
dB(A)
dB(A) 100.0
dB(A)
h
m/s²
m/s²
89.0
3
3
2.0
1.5