Definitions: Safety Guidelines; Ec Declaration Of Conformity; Machinery Directive; Black+Decker - Black & Decker BDB530 Manual

The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given
in EN 60745 and may be used to compare
one tool with another. It may be used for a
preliminary assessment of exposure.
Warning: The declared vibration
emission level represents the main
applications of the tool. However if the tool
is used for di erent applications, with
di erent accessories or poorly maintained,
the vibration emission may di er. This may
significantly increase the 1.5exposure level
over the total working period.
An estimation of the level of exposure to
vibration should also take into account the
times when the tool is switched o or when
it is running but not actually doing the job.
This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to
protect the operator from the e ects of
vibration such as: maintain the tool and the
accessories, keep the hands warm,
organisation of work patterns.
Definitions: Safety Guidelines
The definitions below describe the level of
severity for each signal word. Please read
the manual and pay attention to these
symbols.
DANGER: Indicates an imminently
hazardous situation which, if not
avoided, will result in death or
serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
(Original instructions)

EC declaration of conformity

MACHINERY DIRECTIVE

BLACK+DECKER declares that these
products described under "technical data"
are in compliance with: 2006/42/EC, EN
60745-1
These products also comply with Directive
2014/30/EU and 2011/65/EU. For more
information, please contact STANLEY at the
following address or refer to the back of the
manual.
The undersigned is responsible for
compilation of the technical file and makes
this declaration on behalf of

BLACK+DECKER.

R.Laverick
Engineering Manager
Stanley Black & Decker,
Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
05.2015
ENGLISH
BDB530
7