Connector Pin-out
The ADSL modem card is equipped with a RJ-11 jack for connection to
the ADSL data port. The center two pins, pins 3 and 4, are used for
ADSL data. For the card to make a proper ADSL connection, the
installed ADSL data port should also use pins 3 and 4 for data. If the
ADSL data port installation uses pins 2 and 5 for data, then a wiring
converter will be required. Do not alter or remove the wiring converter
if present. Consult with your ADSL provider before attempting any
wiring changes.
38