Controlling the Remote System with the
Tone Signal – DTMF Transmission
The unit enables you to control the remote system connected by transmitting
the tone signal (DTMF: Dual Tone Multi Frequency) assigned to the numbers
for dialing (0-9,
1
Press the TONE (
communication.
The DTMF menu appears on the monitor screen.
2
Press one of the number buttons (0-9,
corresponding to the tone signal you want to transmit to the remote party.
The tone signal will be transmitted when the button is pressed.
3
To stop transmitting the tone signal, press the ENTER button on the
Remote Commander.
The DTMF menu disappears.
Note
The microphone is automatically turned off while the DTMF menu is displayed.
Controlling the Remote System with the Tone Signal – DTMF Transmission
,
).
) button on the Remote Commander during
,
) on the Remote Commander
135