Remote Update - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Remote Update

!
Attention! Do not turn off the router before the firmware upgrade is completed. This may
cause the device breakdown.
To update the firmware of the router remotely, follow the next steps:
1. On the System / Firmware upgrade page, in the Remote update section, click the
Check for updates button to check if a newer firmware version exists.
2. Click the OK button in the window displayed to upgrade the firmware of the router. Also
you can upgrade the firmware of the router by clicking the Remote update button (the
button is displayed if a newer version of the firmware is available).
3. Wait until the router is rebooted (about one and a half or two minutes).
4. Log into the web-based interface using the login (admin) and the current password.
5. Select the Factory line in the top-page menu displayed when the mouse pointer is over the
System caption.
6. Wait until the router is rebooted. Log into the web-based interface, using the default IP
address, login and password (192.168.0.1, admin, admin).
After the upgrade is completed, the new version of the firmware will be displayed in the Firmware
version field in the top left corner of the page.
Page 161 of 169
Configuring via Web-based Interface