D-Link DIR-615 User Manual page 45

DIR-615 Wireless N300 Router
User Manual
Figure 35. Configuring Dynamic IP WAN connection. The expert settings mode. The IP and Miscellaneous
Parameter
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Enable RIP
Enable IGMP Multicast
NAT
Firewall
sections.
IP
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Page 45 of 169
Configuring via Web-based Interface
Description