Operation - Craftsman 315.115940 Operator's Manual

19.2 volt remote-controlled race truck
Table of Contents

Advertisement

WARNING:
Do not allow familiarity with products to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
WARNING:
Do not use any attachments or acces-
sories not recommended by the manufacturer of this
product. The use of attachments or accessories not
recommended can result in serious personal injury.
WARNING:
Driving the truck requires skill and prac-
tice. Its use is not recommended for use by anyone
under the age of 14. When not used as instructed,
the truck can cause property damage or possible
serious personal injury.
INSTALLING THE BATTERY PACK
See Figures 4 - 6.
To open the battery port door:
 Turn the latches on the truck in the direction shown to
release and remove the door.
To install the battery pack:
 Align the raised rib on the battery pack with the groove
in the battery port.
 Place the battery pack in the truck.
 Make sure the latches on each side of the battery pack
snap in place and that the battery pack is secured in
the truck.

OPERATION

LATCHES FOR BATTERY
PORT DOOR
Fig. 4
9
 Slide the tabs on the door into place. Turn the latches
to secure the door.
REMOvING THE BATTERY PACK
 Open and remove the battery port door.
 Depress the latches on both sides of the battery pack
to release it. Remove battery pack.
 Close the battery port door.
 Lock the door into place with the battery door latches.
OPEN TO REMOVE
BATTERY PORT DOOR
Fig. 5
BATTERY
PACk
LATCHES
DEPRESS LATCHES TO
RELEASE BATTERY PACk
Fig. 6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents