Asus 1U Rackmount Chassis Kit R10-A2P4 User Manual page 20

4. Fit the rear panel connectors to
the I/O shield openings on the
chassis rear.
5. Match the motherboard holes with
the chassis standoffs.
6. Secure the motherboard with
screws. Refer to the motherboard
user guide for the specific number
of screws that you need to use.
The chassis appears as shown
with the motherboard installed.
Refer to the motherboard user guide for instructions on installing CPU,
heatsink, and system memory.
2-8 Chapter 2: Hardware setup