Receiving Faxes Manually; Viewing Faxes On The Lcd Screen - Epson XP-830 User Manual

Receiving Faxes Manually

You can set up your product to receive faxes manually by turning off Auto Answer mode. This lets you
check for a fax tone on the connected telephone before receiving a fax.
1. When the connected telephone rings, answer the call.
2. If you hear a fax tone, select Receive on the LCD screen.
3. Press the
4. Press the
Parent topic:

Viewing Faxes on the LCD Screen

You can save received faxes in your product's memory and view them on the LCD screen. To save faxes
rather than printing them, select Setup > Fax Settings > Receive Settings > Fax Output > Change
Settings > Save to Inbox.
1. Press the
If faxes have been received, you see a message on the home screen.
2. Select Open Inbox.
3. Select the fax you want to view.
You see the fax displayed on the screen.
4. Do the following, as necessary:
• To view the next fax, select the right arrow icon.
• To print the fax, press the
• To display the menu for printing and deleting, select the
Note: You can also select Menu on the main Inbox screen to print or delete all faxes at the same time.
Delete faxes after you print or view them to prevent the product's memory from filling up. When the
memory is full, you cannot receive or send faxes.
Parent topic:
Related references
Fax Receive Options
Start button, then hang up the phone.
Start button again to print the fax.
Receiving Faxes
home button, if necessary.
Start button.
Receiving Faxes
icon.
241