Panasonic KX-TDA50 Feature Manual page 190

11.1.3 Message Waiting
[Example]
105:Tom Smith
Conditions
•
Message Button
Any flexible button can be assigned as a Message button. This button can be used on a PT which does
not have the MESSAGE button (fixed button), or can be used on any PT to access messages left for another
extension or for an incoming call distribution (ICD) group.
•
Distinctive Dial Tone for Message Waiting
If Distinctive Dial mode is enabled, dial tone 4 will be sent to an extension when a message has been left
on the extension. (® 4.1.3 Dial Tone)
•
SLT with a Message Waiting Lamp (KX-TDA100/KX-TDA200/KX-TDA600 only)
The lamp activates in the same way as the MESSAGE button on a PT provided an EMSLC or MSLC card
is connected to the PBX. The preferred Message Waiting Lamp light pattern can be selected from the
twelve patterns shown below. System programming for each extension port is required to use this feature.
190 Feature Manual
--- Extension no. and name of who left the message
Message buttons
This extension
ICD Group
Other extension*
* This button is useful, for
example, when a secretary
checks messages left for the
boss (Boss & Secretary Feature).
Document Version 2010-11