Data Line Security; Dial Mode Selection - Panasonic KX-TDA50 Feature Manual

4.1.2 Dial Mode Selection

4.1 D

4.1.1 Data Line Security

Description
Once Data Line Security is set on an extension, communication between the extension and the other party is
protected from signals such as Call Waiting, Hold Recall and Executive Busy Override. Extensions which have
devices connected to them such as modems or fax machines may set this feature to maintain secure data
transmission, by blocking tones or other interruptions during communication.
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Features—
6.1 [4-1-1] Wired Extension—Extension Settings—Option 2—
Operating Manual References
1.3.18 Data Line Security
4.1.2 Dial Mode Selection
Description
The dialing mode (rotary or tone) can be selected for each analog CO line through system programming
regardless of the originating extension (under contract with the telephone company).
Mode
DTMF (Dual Tone
Multi-Frequency)
Pulse Dial (Rotary)
Conditions
•
Pulse to Tone Conversion
It is possible for an extension user to temporarily switch from Pulse mode to DTMF mode in order to access
special services such as computer-accessed long distance calling or voice mail services. To switch to
DTMF mode, wait for a preprogrammed time period (Default: 5 seconds) after the CO line is connected,
or press . This feature works only on CO lines set to Pulse mode. DTMF mode cannot be changed to
Pulse mode.
•
It is possible to select a pulse rate for the CO line port which has been set to Pulse mode. There are two
pulse rates: Low (10 pps) and High (20 pps).
•
It is possible to assign the minimum duration of the DTMF signal sent to the CO line port which has been
set to DTMF mode.
PC Programming Manual References
3.11 [1-1] Slot—Port Property - LCO Port
70 Feature Manual
Data Line Security Set / Cancel
Numbers dialed by an extension user are transmitted to the CO line
using analog tones.
Numbers dialed by an extension user are transmitted to the CO line
using analog pulses.
Data Mode
Description
Document Version 2010-11