Configuring The Network Mailbox For Fast Access - Siemens Gigaset A580 IP User Manual

Configuring the network mailbox for fast access

With fast access you can dial a network mailbox directly.
Assigning key 1 of the handset, changing assignments
The setting for fast access is handset-specific. You can assign a different mail-
box to key on each registered handset.
No mailbox is preconfigured for fast access in the default settings.
Preconditions:
u
At least one receive number is assigned to the handset.
u
The corresponding network mailbox has been entered and activated for at
least one of the receive numbers on the handset.
Or:
¢
§Menu§
s
The selection includes the network mailboxes that belong to a VoIP/fixed line
network connection and whose phone number is assigned to the handset as a
receive number.
tive standard name of the connection
If a number has already been saved to the base station for the selected network
mailbox, fast access is activated.
a
If no number has been saved for the network mailbox the message
is displayed. You then have to first enter the mailbox number using the Web
configurator (
Please note
You can only assign fast access to one mailbox.
However, you can also call the network mailbox assigned to a handset's receive
numbers directly via the message key (
Calling the network mailbox and listening to messages
If you have set a network mailbox for fast access you will be connected directly
to this network mailbox (external call).
d
You will hear the answering machine announcement.
Fast access has not yet been set on the handset:
Press and hold key .
¢
Voice Mail Set Key 1
Select and press
§OK§
Select network mailbox and press
are displayed, where xxx is replaced by the respec-
Net AM: xxx
Press and hold (idle status).
£
Page 139).
Press and hold.
If necessary, press the handsfree key.
.
(
§OK§
(IP1 to IP6,
Fixed
£
Page 78).
Using the network mailbox
‰
= on).
Line).
Not possible!
77