group, tap the relevant access point if it is not already
highlighted, and select
Options
to other
dest..
To change the priority of an access point within the
group, select
Options
>
priority.
Packet data access points
Select
Menu
Settings
>
Destinations
Access
>
instructions on the screen.
To edit a packet data access point, open one of the
access point groups, and select an access point marked
with
.
Follow the instructions from your service provider.
Select from the following:
Access point name
— You obtain the access point
●
name from your service provider.
User name
— The user name may be needed to
●
make a data connection, and is usually provided by
your service provider.
Prompt password
— If you must enter the
●
password every time you log in to a server, or if you
do not want to save your password in the device,
select Yes.
Password
— A password may be needed to make
●
a data connection and is usually provided by your
service provider.
Organize
>
>
Organize
Change
>
and
Connectivity
>
point, and follow the
Authentication
●
Copy
your password encrypted or
password encrypted when possible.
Homepage
— Depending on the access point you
●
are setting up, enter the web address or the address
of the multimedia message center.
Use access point
●
you want the device to ask for confirmation before
the connection using this access point is created, or
Automatically
the destination using this access point
automatically.
Select
Options
following:
Network type
●
to transfer data to and from your device. The other
settings depend on the selected network type.
Phone IP address
●
address of your device.
DNS addresses
●
primary and secondary DNS servers, if required by
your service provider. To obtain these addresses,
contact your internet service provider.
Proxy server address
●
proxy server.
Proxy port number
●
the proxy server.
— Select
Secure
to always send
Normal
to send your
— Select
After confirmation
if you want the device to connect to
Advanced settings
and from the
>
— Select the internet protocol type
(for IPv4 only) — Enter the IP
— Enter the IP addresses of the
— Enter the address of the
— Enter the port number of
if
73