Connecting The Base - Motorola C401 Manual

Connecting the base

1. Plug the telephone line cord into the socket marked
2. Plug the power adaptor with clear connector into the socket marked
the base and plug the other end into the mains power wall socket. Switch on the mains
power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert the rechargeable
Ni-MH battery cells supplied. Please note the '+' and '-' markings inside the battery
compartment and insert in the correct direction.
2. Slide the battery cover back into place.
3. If you are charging the batteries for the first time, place the handset on the base to
charge for at least 24 hours continuously.
4. When the handset is fully charged,
the other end of the telephone line cord (make sure that one end is already plugged
into the base) into the telephone wall socket.
Getting started
on the underside of the base.
1
Press down
2
Slide
icon will appear steady on the display. Plug
on the rear of
7