Open The Information; Enabling/Disabling Inputs; Reset To Factory Default Setting; Exit The Osd Main Menu - Siemens CMTC1515 User Manual

Adjusting the OSD Screen (DVI and PC)
8.8

Open the Information

8.9

Enabling/Disabling Inputs

8.10

Reset to Factory Default Setting

8.11

Exit the OSD Main Menu

22
Siemens Building Technologies
Fire Safety & Security Products
Open the OSD main menu and select the option INFORMATION, see chapter 8.1:
OSD Main Menu.
The INFORMATION menu provides the user with detailed information regarding
the version, resolution, H-FREQ and V-FREQ.
Open the OSD main menu and select the option SOURCE, see chapter 8.1: OSD
Main Menu.
This feature allows the user to turn off the inputs to the monitor that are not
connected and quickly select the desired input source. Disabling the unused inputs
permits the user to bypass the disabled input sources and only choose from the
enabled inputs by pressing the Source/Enter button.
SOURCE AV1
AV2
SV
DVI
PC
For example: with AV1 set to Enable and AV2 set to Enable and all other inputs set
to Disable, when you press the source button, it will only cycle between AV1 and
AV2.
NOTE
The monitor will automatically return to the last input that was being used if power is interrupted to the
monitor during use.
Open the OSD main menu and select the option RECALL, see chapter 8.1: OSD
Main Menu.
The option Recall returns the monitor to its factory default settings.
NOTE
1. If there is no operation or automatic adjustment within the set time, the screen will be closed
automatically
2. If the screen operation becomes abnormal or functions improperly, please turn it off then turn it on
again.
Press the MENU/EXIT button once to exit the main menu.
If the MENU/EXIT button is not pressed, the monitor will automatically exit the
adjusting screen after a preset time (in seconds).
Enable Disable
Enable Disable
Enable Disable
Enable Disable
Enable Disable
01.2006