Adjusting The Osd Screen (Av Equipment); Osd Main Menu; Adjusting Brightness, Contrast, Image Of The Screen, Volume - Siemens CMTC1515 User Manual

9

Adjusting the OSD Screen (AV Equipment)

9.1

OSD Main Menu

9.2 Adjusting Brightness, Contrast, Sharpness, Volume
Siemens Building Technologies
Fire Safety & Security Products
The OSD main menu is composed of text and graphics.
1. Press the Menu/Exit button
For adjusting the OSD screen the following options are available:
MAIN MENU
MAIN ADJUST
COLOR ADJUST
SCAN SETTING
MOTION SETTING
VOV SETTING
SETUP MENU
SOURCE
RECALL
Fig. 2 Options of the OSD main menu
Select the desired option by using the two ▲/+,▼/- buttons.
2.
The selected option is highlighted in blue.
3. Press the Source/Enter button to enter the submenu for adjusting items.
Change the value you wish to adjust by using the ADJUST ▲/+,▼/- buttons
4.
5. Press the Menu/Exit button once.
The settings will be automatically saved to the monitor's memory.
The OSD main menu disappears.
Open the OSD main menu and select the option MAIN ADJUST, see chapter 9.1:
OSD Main Menu.
There are seven items on this submenu:
BRIGHTNESS
This option is used to set the brightness of the screen.
CONTRAST
This option is used to adjust the image contrast.
SHARPNESS
This option is used to adjust the clarity of the screen image.
SATURATION
This option is used to adjust the color density.
TINT
This option is used to adjust the color tint (NTSC only).
Adjusting the OSD Screen (AV Equipment)
23
01.2006