Table of Contents
Advertisement
Glass edge lighting ]
^ Press the button for the glass edge
lighting ] to have the glass edge lit
from behind. It can be turned on and
off independently of the fan and
overhead lighting.
Changing the color of the
glass edge lighting £
The color of the glass edge lighting can
be changed as desired.
White is the preset color.
^ Turn on the glass edge lighting ].
^ Six factory-set colors can be called
up by pressing the color change
button £ repeatedly:
White
Green
Red
Blue
Rapid color sequence
The light color changes continuously.
All colors are cycled through once
every minute. Initially, the button
indicator flashes rapidly.
Slow color sequence
Operates the same above, but the
colors rotate once every 15 minutes.
Initially, the button indicator flashes
slowly.
A selected light color can be saved.
To select the color:
^ Select the rapid or slow color
sequence (color setting
The continuous color changes start.
^ When the desired color is reached,
press and hold the color change
button £ until the glass edge
lighting flashes three times.
This light color is now saved as an
additional color setting
^ It can be selected at any time until a
new color is saved in the same way.
^ To turn it off, press the button for the
glass edge lighting ]. The lighting
turns off after a short delay.
The next time you turn it on, the last
active color setting
Automatic Safety Shut-Off
The fan will turn automatically off 10
hours of use. The lighting however will
remain on.
^ Press the On/Off button K to turn the
fan back on again.
Operation
or
).
.
to
is selected.
13
Hide quick links:
Advertisement
Table of Contents
