Panasonic AW-HE100E Operating Instructions Manual page 46

Basic menu operations
When the camera is to be controlled from the AW-CB400/AW-RP400 controller
The EXT command is allocated to the [OPTION SW] button to switch between Auto Focus and Manual Focus.
Each time the [EXT] button is pressed, the focus mode switches between Auto Focus and Manual Focus.
The following functions allocated to the [OPTION SW] are not available: DEF, WIP, HEATER/FAN, LAMP, OPTION, ND
The following settings of the LCD menu do
not function: TILT RANGE, MEMORY LENGTH
Do not use the OPTION function
of the AW-CB400 to operate the
ZOOM/FOCUS, use the ZOOM lever or
FOCUS dial of the AW-RP400 instead.
1
Press one of the [1] to [5] buttons of [CONTROL SELECT] to select the unit which is to be
operated.
2
Press the [A] button of [OPTION SW] for two seconds.
The main menu is displayed on the monitor.
3
Press the [A] or [B] button of [OPTION SW] to make the item to be selected blink.
Press the [A] button of the [OPTION SW] to scroll up the item list.
Press the [B] button of the [OPTION SW] to scroll down the item list.
The TRACING MEMORY
function is not available.
The camera menu operation becomes available when the CAMERA
MENU CNT item is set to ENABLE in the LCD menu of the AW-CB400.
[OPTION SW]
[A]: Opens the menu and also scrolls up the item list.
[B]: Scrolls down the item list.
[C]: Confirms the item selection and also changes a set value in the
positive direction.
[D]: Changes a set value in the negative direction.
45 (E)
The R/B PED dial is
not available.