Privacy Mask Setting Tool; Register Privacy Masks - Canon VB-R11VE Operation Manual

Privacy Mask Setting Tool

This tool masks specified areas of the camera video. You can check the camera video and set up to 8 privacy masks.
When the camera is panned, tilted, or zoomed, the privacy mask areas follow the camera video.
Important
• Privacy masks are applied to all video transmitted from the camera (live video, uploaded video, recorded video and video recorded to
a memory card).
• Privacy masks are not available in the following situations.
– While the camera is launched after being turned on.
– For camera video in the Camera Angle Setting Tool
– While a panorama image is being created.
• Intelligent Function detection also works in the privacy mask areas. Subject movement may be visible.

Register Privacy Masks

Use the mouse to position and size the privacy mask areas, then save the settings to the camera.
1 If you have not yet obtained the camera control privileges, click the [Obtain/Release Camera Control Privileges]
button and obtain the control privileges (P. 147).
2 Set the size and position for the privacy mask in the video display area.
Drag the preview frame displayed in the video display area to the position you want to mask.
Change the size of the preview frame by dragging the handles (■) positioned on its four sides.
196
M641 M640 M741 M740
R11 R10
Settings Screen for the Privacy Mask Setting Tool