Canon VB-S30D Operating Manual page 54

distribution is confined to the local segment only and
cannot be distributed by the router.
(6) [Audio Transmission]
Set RTP streaming audio transmission to [Disable] or
[Enable].
Note
• RTP stream URL
rtsp://IP_address:port_number/rtpstream/config1(~5)=r|u|m
[=r|u|m] is optional and can be omitted. If specified, specify
only one option.
r: Requests RTP over TCP
u: Requests RTP over UDP
m: Requests multicast
Example: RTP streaming 1 request using RTP over TCP
rtsp://192.168.100.1:554/rtpstream/config1=r
Note that the actual operation is dependent on the RTP client
application, so the URL does not necessarily specify the
method used for transmission.
• For H.264, the bit rate control and video quality are determined
by the settings in [Video] (p. 51).
• Regardless of the [Server] > [Audio Server] > [Audio
Transmission from the Camera] setting, RTP streaming audio
will be used.
However, to use audio settings, select [Enable] for [Audio
Transmission from the Camera] and make the settings.
• The [Access Control] > [User Authority] > [Video Distribution]
and [Audio Distribution] settings are not used for RTP.
• RTP streaming video may not be viewable on systems using a
proxy server or firewall. If the video cannot be viewed, contact
the system administrator.
• If host access restrictions are applied to a client while it is
streaming using RTP over UDP, it may take from a few to
several seconds until streaming ceases.
54