Hitachi CP-EX251N User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-EX251N
  6. User manual
Hitachi CP-EX251N User Manual

Hitachi CP-EX251N User Manual

Hide thumbs Also See for CP-EX251N:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Projector
CP-EX251N/CP-EX301N/CP-EW301N
User's Manual (detailed)
Network Guide
Thank you for purchasing this product.
This manual is intended to explain only the network function. For proper use of this
product, please refer to this manual and the other manuals for this product.
WARNING
product. After reading them, store them in a safe place for future reference.
Features
This projector has the network function that brings you the following main features.
 Web Control : allows you to monitor and control the projector through a network from a
computer. (15)
 Network Bridge
computer. (49)
NOTE
slightly from your projector.
this manual.
permitted without express written consent.
1

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-EX251N

Summary of Contents for Hitachi CP-EX251N

  • Page 1 Projector CP-EX251N/CP-EX301N/CP-EW301N User's Manual (detailed) Network Guide Thank you for purchasing this product. This manual is intended to explain only the network function. For proper use of this product, please refer to this manual and the other manuals for this product.

  • Page 2: Table Of Contents

    Contents Contents  1. Network Function ..............4 1.1 Web Control ....................4 ................5 1.3 Other Functions ................... 6 1.3.1 E-mail Alerts ........................6 ......................6 .................. 6 2. Connection to the network ............7 ................. 7 ................8 ..............
  • Page 3 Contents  4. Network Bridge Function ............49 .................. 49 4.2 Communication setup ................50 4.3 Communication port ................. 50 4.4 Transmission method ................51 ......................51 ....................... 52 5. Other Functions ..............53 5.1 E-mail Alerts ..................... 53 ..................56 ............

  • Page 4: Network Function

    1. Network Function 1. Network Function This chapter describes the outline of network function. 1.1 Web Control status monitoring of the projector can be performed by Web browser. Two types of interface, ”Projector Web Control” and “Crestron e-Control”, are 15) Projector Web Control Crestron e-Control...

  • Page 5: Network Bridge Function

    1. Network Function 1.2 Network Bridge Function TCP/IP data Protocol change Computer LAN port CONTROL port...

  • Page 6: Other Functions

    1. Network Function 1.3 Other Functions 1.3.1 E-mail Alerts maintenance or detected an error. (53) 1.3.2 Event Scheduling power on / power off. It enables to be “self-management” projector. in the projector. (56) 1.3.3 Command Control via the Network commands. (59)

  • Page 7: Connection To The Network

    2. Connection to the network 2. Connection to the network 2.1 System requirements through the network. The projector: 1 unit, Computer: 1 or more sets For the wired connection *1 NOTE ...

  • Page 8: Connection Via Wired Lan

    2. Connection to the network Connection via wired LAN following the instructions of your network administrator when connecting to the existing network. Connection setup of Wired LAN 2) Press the MENU button on the remote control or the control panel of the projector. DHCP As for setting an IP address, refer to “About IP address”.
  • Page 9 2. Connection to the network [About IP address] The Network address portion of the IP address setting on your computer must be the same as the setting on the projector. Also, the entire IP address on the including the projector. The projector’s settings are as follows.

  • Page 10: Network Menu

    2. Connection to the network 2.4 NETWORK Menu Remember that incorrect network settings on this to consult with your network administrator before connecting to an existing access point on your network. the following functions. remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.
  • Page 11 2. Connection to the network Description Any name can be set to the projector to identify it on the network. NAME and press the NAME dialog will be displayed. NAME. the entered characters. characters. Particular projector name is pre-assigned by default.
  • Page 12 2. Connection to the network Description NOTE ・ " " ・ after changing the settings. obtained or not. DHCP ON  OFF SETUP This function can only be used when DHCP is set ADDRESS to OFF. SUBNET MASK This function can only be used when DHCP is set to OFF.
  • Page 13 2. Connection to the network Description settings. The following information is displayed. NETWORK INFORMATION DATE AND TIME TIME DIFFERENCE NOTE truncated if they are too long. (continued on next page)
  • Page 14 2. Connection to the network Description name. They are entered by using software keyboard. SNTP 11) for how to use SERVER software keyboard. NOTE SNTP SETUP Enter the time difference. TIME your computer. If unsure, consult your network administrator. DIFFERENCE setting the TIME DIFFERENCE.

  • Page 15: Web Control

    3. Web Control 3. Web Control computer connected to the same network. You can control the projector, collect the status such as lamp time, and set e-mail or schedule, etc. in Projector Web Control. Recommended web browser ･ Internet Explorer ®...
  • Page 16 3. Web Control NOTE ® ® is created using Flash . You need to install ® ® ® Adobe Flash Player on your computer to use Crestron e-Control . Crestron ® ® e-Control is not displayed in a web browser that does not support Flash 19) is set to Disable, the ®...

  • Page 17: Projector Web Control

    3. Web Control 3.1 Projector Web Control 3.1.1 Login To use the Projector Web Control function, you need to login with your user name and password. name and password. Administrator Password Enter your user name and password, and then click the [OK]. If you login successfully, the screen below will be displayed.

  • Page 18: Network Information

    3. Web Control 3.1 Projector Web Control (continued) 3.1.2 Network Information Displays the projector’s current network Description Displays the projector name settings. DHCP Displays the DHCP setting. IP Address Displays the IP address. Subnet Mask Displays the subnet mask. Default Gateway Displays the default gateway.

  • Page 19: Network Settings

    3. Web Control 3.1 Projector Web Control (continued) 3.1.3 Network Settings DHCP ON Enables DHCP. DHCP OFF Disables DHCP. IP Address Subnet Mask Default Gateway The length of the Projector Name can be up to 64 alphanumeric characters. Only alphabets, numbers and following symbols can be used.
  • Page 20 3. Web Control 3.1 Projector Web Control - Network Settings (continued) NOTE restart the network connection. You can restart the network connection from Network Restart on the main menu. (38)

  • Page 21: Port Settings

    3. Web Control 3.1 Projector Web Control (continued) 3.1.4 Port Settings settings. Description Network Control Port1 (Port:23) Port open Click the [Enable] check box to use port 23. Click the [Enable] Authentication for this port. Network Control Port2 (Port:9715) Port open Click the [Enable] check box to use port 9715.
  • Page 22 3. Web Control 3.1 Projector Web Control - Port Settings (continued) Description Network Bridge Port Input the port number. Except for 41794, 9715, 9716, 9719, 9720, 5900, 5500, 4352 between 1024 and 65535 can be set up. It is set to 9717 as the default setting.

  • Page 23: Mail Settings

    3. Web Control 3.1 Projector Web Control (continued) 3.1.5 Mail Settings settings. Description Click the [Enable] check box to use the e-mail function. Send Mail Alert Settings. SMTP Server Address Network Settings. The maximum length of host or domain name is up to 255 characters.

  • Page 24: Alert Settings

    3. Web Control 3.1 Projector Web Control (continued) 3.1.6 Alert Settings Fan Error Temp Error Air Flow Error Cold Error Filter Error Other Error Filter Time Alarm ...
  • Page 25 3. Web Control 3.1 Projector Web Control - Alert Settings (continued) The Alert Items are shown below. Description (Only Click the [Enable] check box to enable e-mail alerts. Send Mail The length of the subject line can be up to 100 alphanumeric subject line.

  • Page 26: Schedule Settings

    3. Web Control 3.1 Projector Web Control (continued) 3.1.7 Schedule Settings NOTE   of schedule settings. ( Description Sunday Monday Tuesday Wednesday Thursday Friday Saturday...
  • Page 27 3. Web Control 3.1 Projector Web Control - Schedule Settings (continued) Description Schedule the bottom of the screen. Input the date (month/day) when the schedule is executed for Date (Month/Day) Click the [Apply] Click the [Refresh] button to update the screen to the latest status. Click the button to display the program edit of the selected program.
  • Page 28 3. Web Control 3.1 Projector Web Control - Schedule Settings (continued) 2) Program Edit the following items. NOTE can be registered in 1 program. Description Power STANDBY Input Source COMPUTER IN1 COMPUTER IN2 HDMI VIDEO...
  • Page 29 3. Web Control 3.1 Projector Web Control - Schedule Settings (continued) Description Eco Mode ECO-1 ECO-2 INTELLIGENT SAVER Blank Click the [Register] Click the [Delete] Click the [Delete All] selected program. Click the [Back] button to go back to the schedule management screen.
  • Page 30 3. Web Control 3.1 Projector Web Control (continued) 3.1.8 Date/Time Settings settings. Description Current Date format. format. Click the [ON] set the following items. Start Month Week hour Month Week hour (continued on next page)
  • Page 31 3. Web Control 3.1 Projector Web Control - Date/Time Settings (continued) Description as the one set on your computer. If unsure, consult your IT manager. SNTP Server Address SNTP up to 255 characters. Cycle Click the [Apply] NOTE restart the network connection. You can restart the network connection from Network Restart on the main menu.

  • Page 32: Security Settings

    3. Web Control 3.1 Projector Web Control (continued) 3.1.9 Security Settings security settings. Description User Account The length of the text can be up to 32 alphanumeric characters. Password The length of the text can be up to 255 alphanumeric characters.

  • Page 33: Projector Control

    3. Web Control 3.1 Projector Web Control (continued) 3.1.10 Projector Control Operations of the projector can be performed with the items on the screen. The categories of the items are shown in the main menu. Refer to the table below for details. NOTE [Refresh] button.
  • Page 34 3. Web Control 3.1 Projector Web Control - Projector Control (continued) BRIGHTNESS CONTRAST GAMMA COLOR TEMP PICTURE COLOR TINT SHARPNESS MY MEMORY ASPECT The selected parameter cannot be set depending on the input signal. OVER SCAN V POSITION IMAGE H POSITION H PHASE H SIZE AUTO ADJUST EXECUTE...
  • Page 35 3. Web Control 3.1 Projector Web Control - Projector Control (continued) AUTO ECO MODE LAMP & FILTER ECO MODE FILTER MESSAGE KEYSTONE V INSTALLATION SETUP STANDBY MODE NOTE VOLUME AUDIO SPEAKER AUDIO SOURCE LANGUAGE Click the [Apply] button to switch the language on the Web screen according to the setting of the selected language in the projector.

  • Page 36: Remote Control

    3. Web Control 3.1 Projector Web Control (continued) 3.1.11 Remote Control The functions on the bundled remote control are assigned to the Web Remote Control screen. Do not control the projector with the projector's the same time. It may cause some operational errors in the projector.

  • Page 37: Projector Status

    3. Web Control 3.1 Projector Web Control (continued) 3.1.12 Projector Status Displays the current settings and status of the projector. Description Error Status Displays the error status. Displays the usage time for the lamp. Power Status Displays the power status. Input Status Displays the input signal source.

  • Page 38: Network Restart

    3. Web Control 3.1 Projector Web Control (continued) 3.1.13 Network Restart Restarts the projector’s network connection. Description Restarts the projector’s network connection in order to Restart NOTE clicking the [Restart] button to log on again.

  • Page 39: Connection Test

    3. Web Control 3.1 Projector Web Control (continued) 3.1.14 Connection Test Description Click the [Execute] button to test the connection after Destination IP Address entering IP address to connect to. Display example of the connection succeeded Display example of the connection failed NOTE properly when the packets for checking the connection are discarded before...

  • Page 40: Crestron E-Control

    3. Web Control ® 3.2 Crestron e-Control (44), a dialog prompting you to enter the password as shown on the right will be displayed, and no operation is enabled until the preset password, the dialog disappears and the Main window will be displayed. As shown below, you can open a window by clicking the corresponding tab at the top right of the window.
  • Page 41 3. Web Control ® 3.2 Crestron e-Control (continued) NOTE 19) is set to Disable, ® ® Crestron e-Control cannot be used to operate the projector. Enable Crestron ® e-Control and close the web browser. Next, restart the web browser, followed by entering the projector's IP address.

  • Page 42: Main Window

    3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.1 Main window You can operate the basic controls of the projector on this screen. NOTE [Power] button can be operated. 1 . Click a button and operate as follows. Button Description Power Turns the power on/off.
  • Page 43 3. Web Control ® 3.2 Crestron e-Control - Main window (continued) Button Description Freeze Turns Freeze on/off. Contrast Adjusts the contrast setting. Brightness Adjusts the brightness setting. Color Adjusts the color setting. Sharpness Adjusts the sharpness setting. Magnify to magnify. Auto Performs the automatic adjustment.

  • Page 44: Tools Window

    3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.2 Tools window ® control system. between the projector and Crestron Click the [Exit] button to return to the Main window. NOTE set correctly. 1. Crestron Control ® Description IP Address IP ID Port control system.
  • Page 45 3. Web Control ® 3.2 Crestron e-Control - Tools window (continued) (continued) Description DHCP Enables DHCP. IP Address Subnet Mask Default Gateway DNS Server To apply the settings, click the [Send] button. 3. User Password ® starting e-Control , select the checkbox. Description You can specify a password up to 26 alphanumeric characters.

  • Page 46: Info Window

    3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.3 Info window Displays the current settings and status of the projector. Click the [Exit] button to return to the Main window. Description Displays the projector name settings. Location Displays the location name of the projector. MAC Address Resolution selected on the projector.

  • Page 47: Help Desk Window

    3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.4 Help Desk window ® ® Button Description Send...

  • Page 48: Emergency Alert

    3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.5 Emergency Alert ® ® sends out an alert message, it will be displayed on the screen. Input a message in the box below the alert message, and click the [Send] button. NOTE ®...

  • Page 49: Network Bridge Function

    4. Network Bridge Function communication using the projector as a network terminal. TCP/IP data Protocol change Computer LAN port CONTROL port 4.1 Connecting devices 1) Connect the projector’s LAN for Ethernet communication. 2) Connect the projector’s CONTROL NOTE ensure the connection. each port and use the suitable cable.

  • Page 50: Communication Setup

    4. Network Bridge Function 4.2 Communication setup (OPTION menu CONTROL port. for the CONTROL Condition 4800bps/9600bps/19200bps/38400bps PARITY Data length CONTROL port according to your use. NOTE setting. that an unsuitable setup could cause malfunction of communication. CONTROL port. 4.3 Communication port web browser.

  • Page 51: Transmission Method

    4. Network Bridge Function 4.4 Transmission method The transmission method can be selected from the menus, only when the (OPTION menu  4.4.1 HALF-DUPLEX This method lets the projector make two way communication, but only one synchronize the communication. the instructions below. TCP/IP data Protocol change Computer...
  • Page 52 4. Network Bridge Function 4.4 Transmission method (continued) NOTE 254 byte data at the maximum at a time. The OFF is selected as the default setting. 4.4.2 FULL-DUPLEX This method lets the projector make two way communication, transmitting and make the synchronization. NOTE When the computer controls the synchronization of receptions and transmissions, processing of the projector.

  • Page 53: Other Functions

    5. Other Functions 5. Other Functions 5.1 E-mail Alerts maintenance or detected an error. NOTE power. to send a mail. using. Description Cover Error Fan Error The cooling fan is not operating. The lamp does not light, and there is a possibility that interior portion has become heated.
  • Page 54 5. Other Functions NOTE menu which  an e-mail will be sent. will be sent.
  • Page 55 5. Other Functions through a web browser. Mail Settings (23) [Mail Settings] on main menu in Projector Web Control. (23) for further information. 3) Click the [Apply] 4) Click the [Send Test Mail] correct. Alert Settings (24) [Alert Settings] on main menu in Projector Web Control. 24) for further information.

  • Page 56: Event Scheduling

    5. Other Functions 5.2 Event Scheduling power off. It enables to be “self-management” projector.  AC power is turned off. ( Note the following before setting the schedule. NOTE projector. ( can be registered in 1 program. date No. 2’ and so on. at the same time.
  • Page 57 5. Other Functions The procedure to set the schedule in Projector Web Control is described in the following. In the case that the program has already been set, skip to step 6). [Schedule Settings] on main menu in Projector Web Control. button to display the following program edit display.
  • Page 58 5. Other Functions 4) When you want to edit the program with other number continuously, select the program you want to edit in dropdown list and click the [Select] button to display the display for editing the selected program. 5) Click the [Back] button to go back to schedule management screen after described in the following.

  • Page 59: Command Control Via The Network

    5. Other Functions 5.3 Command Control via the Network commands. Communication Port The following two ports are assigned for the command control. TCP #23 (Network Control Port1 (Port: 23)) TCP #9715 (Network Control Port2 (Port: 9715)) NOTE Command Control Settings (21) : If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/”...
  • Page 60 5. Other Functions 5.3 Command Control via the Network (continued) (32) 7) Click the [Security Settings] on the main menu. 8) Click the [Network Control] and enter the desired authentication password. 9) Click the [Apply] NOTE Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715) and PJLink™ Port (Port: 4352).

  • Page 61: Command Format

    5. Other Functions 5.3 Command Control via the Network (continued) Command Format Command formats differ among the different communication ports.  failure when authentication is enabled. Reply Error code 0x1F 0x04 0x00 The following formatting is added to the header (0 x 02), Data length (0 x 0D), Connection Header Data length...
  • Page 62 5. Other Functions 5.3 Command Control via the Network (continued) The connection ID (the data is same as the connection ID data on the sending Connection Reply 0x06 1 byte Connection Reply 0x15 1 byte Connection Reply Error code 0x1C 2 bytes 1 byte Connection...
  • Page 63 5. Other Functions 5.3 Command Control via the Network (continued) Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled.

  • Page 64: Crestron Connected

    5. Other Functions 5.4 Crestron Connected Crestron Connected by Crestron Electronics, Inc. It is an application for managing and controlling the For details of Crestron Connected , refer to the Crestron ® website. http://www.crestron.com The following communication interfaces can be used to manage the entire facility. ®...

  • Page 65: Troubleshooting

    6. Troubleshooting 6. Troubleshooting Phenomenon: Cannot communicate with the projector. Item to be checked Turn on the projector. want to use the network function in the standby Is MAC address displayed Contact your dealer when MAC address on correctly in the NETWORK the label put on the projector does not match MAC address displayed in the NETWORK INFORMATION menu.
  • Page 66 6. Troubleshooting Phenomenon: Web(Projector Web Control) is not displayed correctly. Item to be checked Enter the IP address of the projector in Web browser. How to set is different depending on the Web browser. Refer to Help of Web browser, etc. for details.
  • Page 67 6. Troubleshooting Phenomenon: Crestron e-Control is not displayed. ® Item to be checked Has Adobe Flash Player been Adobe Flash ® ® ® ® Crestron e-Control ® Install Adobe Flash Player. ® ® Is Web browser that does not ® support Adobe Flash Player...
  • Page 68 6. Troubleshooting Item to be checked of the Projector Web Control. Consult with your network administrator. the e-mail address in the mail Phenomenon: The schedule is not executed correctly. Item to be checked Turn on the projector. to use the schedule function in the standby Check the settings of Date and Time.
  • Page 69 6. Troubleshooting Item to be checked Is the program to be executed Projector Web Control. time. change the order. * The schedule function may not operate correctly depending on the status of the projector. Phenomenon: The time settings are not correct. Item to be checked The battery is considered to be exhausted if the time is off soon after setting date and time.
  • Page 70 6. Troubleshooting Phenomenon: Item to be checked TYPE menu. TYPE menu. Are the serial settings set Check the serial settings of the projector and...

  • Page 71: Warranty And After-Sales Service

    7. Warranty and after-sales service should occur, stop using the projector immediately. company. They will tell you what warranty condition is applied. for this projector. ® ® ® ® and Internet Explorer , Windows are registered trademark of ® ® and Flash ®...

This manual is also suitable for:

Cp-ew301nCp-ex301n

Table of Contents