Changing The Setting Of The Usb Port - Yamaha YVC-1000 User Manual

Changing the setting of the USB
port
Change the setting depending on the device connected
to the USB port.
USB port
Note
If the firmware version of the product is below 2.03, you
cannot change the setting of the USB port.
■
Setting the data transfer rate of the
USB port
1
In the "YVC-1000 Configurator"
window, select the "USB" tab.
2
Select the data transfer rate.
Setting
HI-SPEED
FULL-SPEED
Select
Description
Transfers data in USB 2.0 High
Speed mode.
Transfers data in USB 2.0 Full
Speed mode.
y
Clicking "ONLINE HELP" allows you to access the
support site that informs whether to select "HI-SPEED"
or "FULL-SPEED" depending on the connected device.
3
A message appears to confirm
whether to restart the product. Click
"OK".
The product restarts. Then, the setting is changed.
38