Table of Contents
Advertisement
22
IP Configuration Settings—Setting IP Configuration of WAN Port
Static IP Settings
NOTE: Complete static IP settings should include a static IP (Option 1 under114), IP address
(111), Subnet Mask (112), and Default Gateway (113). Please contact your local Internet Service
Provider (ISP) if you have any questions.
Function
Select a Static IP
IP address Settings
Subnet Mask Settings
Default Gateway Settings
Save Settings and Restart
Dynamic IP (DHCP) Settings
After entering IVR mode, dial 114.
After hearing "Enter value", dial 2 (to select DHCP).
Saving settings –press 509 (Save Settings). Please restart the system. After the system is restarted,
press 101 to check if the IP address is retained.
If the system does not repeat the IP address, it indicates Gateway has not been properly
connected to the Internet. Please check the cable connection.
ADSL PPPoE Settings
NOTE: Complete PPPoE settings should include: Select PPPoE (Option 3 of 114), PPPoE
account (121) and PPPoE password (122).
Please contact your local Internet Service Provider (ISP) if you have any questions.
Select a PPPoE
After entering IVR mode, dial 114.
After hearing "Enter value", dial 3 (to select PPPoE).
Command
After entering IVR mode, dial 114.
After hearing "Enter value", dial 1 (to select static IP)
After entering IVR mode, dial 111. After hearing "Enter value", enter your IP
address, followed by "#".
Example: If the IP address is 192.168.1.200, dial 192*168*1*200#.
After entering IVR mode, dial 112. After hearing "Enter value", enter your subnet
mask, followed by "#".
Example: If the mask value is 255.255.255.0, dial 255*255*255*0#.
After entering IVR mode, dial 113. After hearing "Enter value", enter your default
gateway's IP address, followed by "#".
Example: If the Default Gateway is 192.168.1.254, dial 192*168*1*254#.
To save settings, dial 509 (Save Settings). The system will save the settings.
Please restart the system. Wait for about 40 seconds for the system to restart, and
then enter 101 to check if the IP address is retained. If the IP address is not
repeated, it indicates that Gateway has not been properly connected, please check
if the cable connection, account, or password are correct.
SIP Operation Manual V2.6
Advertisement
Table of Contents
