Table of Contents
Advertisement
SIP Operation Manual V2.6
4. Setting a Gateway with WEB Browser
The gateway allows users to make settings using a web browser. After opening a browser, enter
Gateway's IP address as the website address in order to enter the Web configuration screen as shown in
the following diagram. (IE Browser used for example: Enter http：//192.168.1.2.)
The factory default WAN IP address for Gateway is 192. 168. 1. 2.You can also enter "101" from the handset to
inquire about the current WAN Port IP address. The factory default LAN Port IP address is 192.168.8.254.
Instructions
Open an Internet browser.
Enter gateway's WAN Port IP address in the website address area (If the PC is connected to the
LAN Port, enter the LAN Port IP address. The default is 192.168.8.254)
The following registration screen will appear (The factory default settings for Login ID and
Password are set to blank).
After completing and confirming the settings, some of the settings will take effect immediately. But
network related settings would take effect after the gateway is restarted. Please go to System
Operation to save the settings before restarting the system.
To avoid several people simultaneously configuring the web and causing problems to users, please enter
the correct Login ID and password. If a user logs into the system, other users from different IP addresses
cannot login at the same time. Please remember to logout or restart the system if not using the web
configuration function.
25
Advertisement
Table of Contents
