Charging Process - DeWalt DCL508 Original Instructions Manual

Charging Process

Refer the tables below for the state of charge of the battery pack.
State of charge–DCB100 and DCB105
charging
fully charged
hot/cold pack delay
replace battery pack
State of charge–DCB107 and DCB112
charging ––
fully charged ––––––––––––––––––––
hot/cold pack delay ––
Hot/Cold Pack Delay
DCB100 AND DCB105
When the charger detects a battery that is too hot or too cold, it
automatically starts a Hot/Cold Pack Delay, suspending charging until
the battery has reached an appropriate temperature. The charger then
automatically switches to the pack charging mode. This feature ensures
maximum battery life.
DCB107 AND DCB112
When the charger detects a battery that is hot, it automatically delays
charging until the battery has cooled.
When the charger detects a battery that is cold, it automatically delays
charging until the battery has warmed.
The red light will continue to blink, but a yellow indicator light will
be illuminated during this operation. Once the battery has cooled,
the yellow light will turn off and the charger will resume the charging
procedure.
XR Li-Ion tools are designed with an Electronic Protection System
that will protect the battery against overloading, overheating or deep
discharge.
– – – –
–––––––––––
–– – –– –
•••••••••••
–– –– –– ––
–– –– –––––––
E NGLI SH
51