Mitsubishi Electric LT-40133 Owner's Manual page 67

Appendix C: TV Guide Daily
Modify Guide Setup
From the Guide Setup screen, you can change channel
lineup, change channel display settings, and view setup
progress (e.g., when the next listings update will occur).
To select channel lineup:
You can view or change (if more than one available) the
channel lineup, using the following procedure:
• While in the Guide Listings, press MENU. This
displays the Setup Screen.
• Press to highlight "Change channel lineup"
and press ENTER. A selection screen appears.
• Make lineup selection:
- If only one selection is available, Next will be
highlighted, press ENTER.
- If more than one selection is available, but you
want to use the one already selected (check-
marked), press ENTER.
- If more than one selection is available and you
want to select a different lineup, press
move highlight back to selections. Press
to move highlight to desired lineup and press
ENTER to select your choice (add checkmark).
Press to highlight Next and press ENTER.
A confirmation screen appears.
• In the confirmation screen, verify lineup selection:
If selection is correct, press ENTER to select
-
"Yes" (add checkmark), press
Next, and then press ENTER.
- If selection is not correct, press
"No," press ENTER to select (add checkmark),
to highlight Next, and then press ENTER
press
to return to the Make Lineup Selection screen.
Note: You may have to select several lineup options
before you receive the correct one for your area. To
edit a specific tune channel number in the Listings grid,
see "To Modify Channel Settings" below.
To modify channel settings:
You can edit how channels appear in the Guide Listing
(reorder their position, change their display setting, and
change their tune channel). Note: The default settings
for each channel are determined by the transmitted
data received by your TV.
Available Options:
•
•
•
Procedure:
•
•
•
to
to highlight
to highlight,
*Note: If you receive both analog and digital versions
of the same channel, do not change the tune channel
number of the digital channel to match the analog
station - this may hinder the ability of the Guide to
receive data. Instead, locate the digital station in the
channel editor and, if necessary, change the channel
row position to a location you prefer.
You can also hide the analog channel (turn off) so it
does not appear in the listings (see "To change Channel
Display Status above").
Appendices
Position - order of the channel in the Listings.
Channel - determines whether or not the channel
is displayed in the Listings (On, Auto-hide, and
Off). Auto-hide displays channels only when show
information is available.
Tune Channel - shows the channel number that
displays in the Listings and which channel number
is used when tuning to that channel.
While in the Guide Listings, press MENU. This
displays the Setup Screen.
Highlight "Change channel display" and press
ENTER. The channel editor screen appears.
Use to
highlight desired
row setting to be
changed.
- To change channel position (Channel No.
highlighted), press
enter a new channel position number. When
correct, press to move highlight to another
position on grid to save changes.
- To change channel display status (status tile
highlighted - next to channel number), repeat-
edly press ENTER to cycle through choices (on,
auto, off). When correct, press
highlight to another position on grid to save
changes.
- To change tune channel number* (Channel
Tune No. highlighted - far right), enter desired
number with remote control number keys
(—/CANCEL key for digital sub-channel separator).
When correct, press
another position on grid to save changes.
67
to move position or
to move
to move highlight to