Table of Contents
Advertisement
4
MECHANICAL INTERFACE
The camera body has two fixing possibilities:
• Three M3 screw holes in the bottom of the camera. The
two in the camera front end are the most important one
because this comprises the sensor.
• The camera neck can be clipped onto a fixed ring
(∅28mm H7).
The sensors optical axis is adjusted with respect to the
centre of the C-mount interface. The sensor rotation is
aligned to be parallel with the bottom of the housing (the
two M3x5 screw holes).
47.0mm.
2/3" CMOS sensor
21.0mm.
Figure 4-1: Dica 220 front view
Page 12
Ø28 mm H7
C-mount
M 23.2
2x M3 x 5
47.0mm.
M3 x 3mm
7.5
21.0
M3 x 5mm
28.0mm.
Figure 4-2: Dica 220 bottom view
2005-06-27
Advertisement
Table of Contents
