Mitsubishi Electric MJ-E152AF-H Instruction Manual page 14

Dehumidifying
There are 5 operation modes to choose from: HIGH, LOW, MILDEW GUARD, EASY and AUTO.
(HIGH, LOW, EASY ...
AUTO
2
1
2
Pressing MODE switch can switch to
AUTO mode.
, MILDEW GUARD ...
1
Blip
Blip Blip
Blip
)
In order to maintain the humidity level, the unit
operates intermittently after automatic switching of
air flow rate.
When the current humidity is lower than the set
value, the unit will stop (both the blower/louvre
will stop). It will restart if the humidity level is
higher than the set value.
For 6 minutes after the power is on, the unit
will begin operating regardless of the room
humidity.
Sometimes it would take a long time to bring
down the humidity depending on opening and
closing frequency of the room door or the size
or shape of the room.
After displaying After displaying
, the current , the current
humidity setting is displayed. humidity setting is displayed.
After 3 After 3
seconds seconds
After approximately 3 seconds, After approximately 3 seconds,
the display returns to the the display returns to the
current humidity display. current humidity display.