D-Link DWC-2000 User Manual page 106

Section 4 - Advanced WLAN Configuration
2. Click Add New WDS Manage AP.
3. Complete the fields in the table below and click Save.
Field
WDS Managed Group ID
Valid AP MAC Address
Hardware Type String
WDS AP MAC Address
STP Priority
D-Link DWC-2000 User Manual
Select the ID associated with the group to configure.
MAC Address of the AP.
Select the AP from the drop-down menu.
Enter the WDS AP MAC address.
Spanning Tree Priority for this AP. The STP priority is used only when spanning tree mode
is enabled.
The STP priority determines which AP is selected as the root of the spanning tree and
which AP has preference over another AP when multiple equal cost paths exist in the
topology. The lower value for the spanning tree priority means that the AP is more likely
to be used for bridging data into the campus network. You should assign a lower priority
to the APs connected to the wired network than to the satellite APs.
The STP priority value is rounded down to a multiple of 4096. The range is 0 – 61440, and
the default value is 36864.
Description
106