Peer Group; Configure Peer Group - D-Link DWC-2000 User Manual

Section 4 - Advanced WLAN Configuration
The Peer Group Configuration feature allows you to send a variety of configuration information from one
wireless controller to all other wireless controllers. In addition to keeping the wireless controller synchronized,
this function allows you to manage all wireless controllers in the cluster from one controller.
Path: Wireless > Peer Group > Peer Configuration
You can copy portions of the wireless controller configuration from one controller to another controller in the
cluster. The Peer Group Configuration Enable/Disable page allows you to select which parts of the configuration
to copy to one or more peer wireless controllers in the group.
You can make changes to a configuration that has been sent to one or more peer controllers, and you can make
changes to a configuration received from a peer controller. No changes automatically propagate from one
controller to the cluster; you must manually initiate a request on one controller in order to copy any configuration
to its peers.
1. Click Wireless > Peer Group > Peer Configuration.
2. Toggle each option to On or Off, and then click Save. Refer to the table on the next page.
Field
General
Discovery
Channel / Power
AP Database
D-Link DWC-2000 User Manual

Peer Group

Configure Peer Group

Enable this field to include the basic and advanced global settings in the configuration
that the controller pushes to its peers. The configuration does not include the
controller IP address since that is a unique setting.
Enable this field to include the L2 and L3 discovery information, including the VLAN
list and IP list, in the configuration that the controller pushes to its peers.
Enable this field to include the RF management information in the configuration that
the controller pushes to its peers.
Enable this field to include the AP Database (Valid AP) in the configuration that the
controller pushes to its peers.
Description
108