Mitsubishi Electric CM33-TL User Manual page 23

Drive A and Drive B
These fields identify the types of floppy disk drives installed.
None
360K, 5.25 in.
1.2M, 5.25 in.
720K, 3.5 in.
1.44M, 3.5 in.
2.88M, 3.5 in.
Video
This field selects the type of video adapter used for the primary system moni-
tor. Although secondary monitors are supported, you do not have to select the
type. The default setting is EGA/VGA.
EGA/VGA
CGA 40
CGA 80
Mono
Halt On
This field determines whether the system will stop if an error is detected during
power up. The default setting is All Errors.
No Errors
All Errors
non-
All, but Keyboard
All, but Diskette
All, But Disk/Key
MAN-0CM33-001
Capacity
Displays the approximate capacity of the disk drive. Usually the size
is slightly greater than the size of a formatted disk given by a disk
checking program.
Access Mode
For hard drives larger than 528MB, you would typically select the LBA
type. Certain operating systems require that you select Normal or
Large. Please check your operating system's manual or Help desk on
which one to select.
No floppy drive is installed.
5-1/4 in. standard drive; 360KB capacity
5-1/4 in. AT-type high-density drive; 1.2MB capacity
3-1/2 in. double-sided drive; 720KB capacity
3-1/2 in. double-side drive; 1.44 MB capacity
3-1/2 in. double-sided drive; 2.88 MB capacity
Enhanced Graphics Adapter/Video Graphics Array. For EGA,
VGA, SVGA and PGA monitor adapters.
Color Graphics Adapter. Power up in 40-column mode.
Color Graphics Adapter. Power up in 80-column mode.
Monochrome adapter. Includes high resolution monochrome
adapters.
The system boot will not stop for any errors detected.
The system boot will stop whenever the BIOS detects a
fatal error.
The system boot will not stop for a keyboard error; it will
stop for all other errors.
The system boot will not stop for a disk error; it will stop for
all other errors.
The system boot will not stop for a disk or keyboard error;
it will stop for all other errors.
MC Series Computer Products
3 AWARD BIOS SETUP UTILITY
19