Pnp/Pci Configuration - Mitsubishi Electric CM33-TL User Manual

Mc series
Table of Contents

Advertisement

3 AWARD BIOS SETUP UTILITY
IRQs Activity Monitoring
Move the cursor to this field and press <Enter>. The "Primary INTR" field, when
set to On will allow the system to respond and wake up to an IRQ activity that
has been detected. When any of the "IRQ3" to "IRQ15" fields is enabled,
access to the specified IRQ will cause the system to wake up completely from
the power management mode. When disabled, the system will not wake up
from the power management mode despite access to the specified IRQ.
PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers some very
technical items and it is strongly recommended that only experienced users
make any changes to the default settings.
Reset Configuration Data
Enabled
Disabled
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically configure all
of the boot and Plug and Play compatible devices.
Auto (ESCD)
Manual
32
The BIOS will reset the Extended System Configuration Data
(ESCD) once automatically. It will then recreate a new set of
configuration data.
The BIOS will not reset the configuration data.
The system will automatically detect the settings for you.
Choose the specific IRQ and DMA resources in the "IRQ
Resources" and "DMA Resources" fields respectively.
MC Series Computer Products
MAN-0CM33-001

Advertisement

Table of Contents
loading

Table of Contents