Ecology Features; Toner Save; Sleep Time - Brother dcp-9020cdw Advanced User's Manual

Chapter 1

Ecology features

Toner Save

You can save toner using this feature. When
you set Toner Save to On, print appears
lighter. The factory setting is Off.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down, or press a or b to
display Ecology.
f
Press Ecology.
g
Press Toner Save.
h
Press On or Off.
i
Press .
NOTE
We do not recommend Toner Save for
printing Photo or Greyscale images.
2

Sleep Time

1
The Sleep Time setting can reduce power
consumption. When the machine is in Sleep
1
mode (Power Save mode) it acts as though it
is turned off. The machine will wake up and
start printing when it receives a print job.
You can choose how long the machine must
be idle before it goes into Sleep mode. The
timer will restart if any operation is carried out
on the machine, such as receiving a job or
making a copy. The factory setting is three
minutes.
When the machine goes into Sleep mode, the
Touchscreen backlight turns off.
a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down, or press a or b to
display Ecology.
f
Press Ecology.
g
Press Sleep Time.
h
Using the keyboard on the
Touchscreen, enter the length of time
(0-50 minutes) the machine will remain
idle before entering Sleep mode.
Press OK.
i
Press .
.
1