Bottom View Of Base; Before You Start; Connecting The Base - Silvercrest SDKT 1.76 A1 User Manual And Service Information

SilverCrest SDKT 1.76 A1

Bottom View of Base

25. Cable guides
26. Telephone connection socket
27. Power adapter socket

Before You Start

Connecting the Base

You'll find a figure of the components mentioned below in the Package Contents section on
page 107.

Plug the power adapter [A] into a wall outlet. Connect the plug using the power adapter
socket [27] on the bottom of the base [B].

Using the supplied telephone cord [F], connect the telephone connection socket [26] on the
bottom of the base to the telephone wall jack.

Secure the cables in the corresponding cable guides [25].
If possible, do not place the base in living rooms or bedrooms. Choose a place where you
are usually not present all the time (e.g. on the corridor). The low-power ECO mode will
already avoid unnecessary exposure to radiation. For more information, please read the
ECO Mode chapter on page 127.
English - 116